Upgrading

Upgrade from 3.3.x to 3.3.y

From a Linux Package Manager

If you have installed from the Deb or RPM package, then you can just upgrade this. However, it is recommended that you have done a backup before doing this. Also if this is on a production server, that you do this during an extended period of scheduled downtime and have previously tested the upgrade on a pre-production server.

From GitHub

If you have installed with GitHub you can update to the latest version using the following commands, substituting y for the version you want:

git fetch origin
git merge tags/v3.3.y

This should warn you if you have made any locally uncommitted changes. You may need to use git stash to move these temporarily and reintegrate after updating from GitHub.

From a Tarball

Although not impossible it is strongly discouraged to upgrade from a tarball. One major reason not to do this is that if you have made any local changes other than to your original archive's configuration, it will be difficult to ensure all these modifications are retained. However, if you wish to do this, you can follow the instructions below, (as the eprints user unless otherwise stated):

1. Download the tarball from files.eprints.org, (e.g. https://files.eprints.org/2306/5/eprints-3.3.16.tar.gz)
2. As the root user, unpack the tarball under the same parent path as your existing EPrints and change the ownership of this whole directory structure

cd /opt
tar -xzvf eprints-3.3.16.tar.gz
mv eprints-3.3.16 eprints3_new
chown -R eprints:eprints /opt/eprints3_new

3. As the root user, stop Apache and EPrints' indexer.

apachectl graceful-stop
/opt/eprints3/bin/epindexer stop

4. Move the archive(s) from your old EPrints to your new one, e.g.

mv /opt/eprints3/archives/* /opt/eprints3_new/archives/

5. Copy SystemSettings.pm to your new EPrints as well as site-wide settings

cp -p /opt/eprints3/perl_lib/EPrints/SystemSettings.pm /opt/eprints3_new/perl_lib/EPrints/
cp -pR /opt/eprints3/cfg /opt/eprints3_new/cfg
cp -pR /opt/eprints3/site_lib /opt/eprints3_new/site_lib

6. If you are aware of any local modifications to files under your EPrints path (e.g. /opt/eprints3) but outside the archives directory then compare these files using diff to work out how your local changes can be integrated. E.g.

diff /opt/eprints3/perl_lib/EPrints/MetaField/Date.pm /opt/eprints3_new/perl_lib/EPrints/MetaField/Date.pm 

7. As the root user, switch round the old and new versions of EPrints, e.g.

mv /opt/eprints3 /opt/eprints3_old
mv /opt/eprints3_new /opt/eprints3

8. Run epadmin test to check there are no configuration issues, e.g.

/opt/eprints3/bin/epadmin test

9. Restart EPrints' indexer.

/opt/eprints3/bin/epindexer start

10. As the root user, restart Apache.

apachectl restart

11. Don't forget to reinstall your Bazaar packages.

Upgrading to EPrints to 3.3

Upgrading from older 3.1 and 3.2 versions of EPrints to 3.3 is somewhat more involved. Please see the following guides:

• Upgrading from 3.1
• Upgrading from 3.2