How to use EPrints with HTTPS

From EPrints Documentation
Revision as of 15:15, 17 November 2017 by (talk | contribs)
Jump to: navigation, search
Manual Sections

This guide is intended for EPrints 3.2 or later.

N.B. Setting up your Apache Web server is beyond the scope of this document. Please see your operating system documentation and the Apache documentation for assistance in setting up Apache in your environment.


It is assumed that EPrints is installed in the directory /opt/eprints3/. If EPrints is installed elsewhere on your server please substitute as appropriate.

To start setting up your existing archive to work under HTTPS, you must first edit /opt/eprints3/archives/[repoid]/cfg/cfg.d/ Initially it will probably look something like the configuration directly below, which is the basic configuration file after you have run /opt/eprints3/bin/epadmin create to setup your archive. Alternatively you could run /opt/eprints3/bin/epadmin config_core [repoid] that will prompt you for the following information. It is suggested that you make a backup of the file regardless before proceeding.

$c->{host} = '';
$c->{port} = 80;
$c->{aliases} = [];
$c->{securehost} = '';
$c->{secureport} = 443;
$c->{http_root} = undef;

Update the file to define the secure host and modify ports as needed. If your Apache web server is not using the standard ports (80,443) you can adjust the 'port' and 'secureport' parameters in the config file accordingly.

$c->{host} = '';
$c->{port} = 80;
$c->{aliases} = [];
$c->{securehost} = $c->{host};
$c->{secureport} = 443;
$c->{http_root} = undef;

Now, you need to create the directory /opt/eprints3/archives/[repoid]/ssl/ and then edit the file /opt/eprints3/archives/[repoid]/ssl/securevhost.conf. This file should look something like:

<VirtualHost *:443>


  ErrorLog logs/ssl_error_log
  TransferLog logs/ssl_access_log
  LogLevel warn

  SSLEngine on
  SSLProtocol all -SSLv2

  SSLCertificateFile /opt/eprints3/archives/[repoid]/ssl/
  SSLCertificateKeyFile /opt/eprints3/archives/[repoid]/ssl/
  SSLCertificateChainFile /opt/eprints3/archives/[repoid]/ssl/

  SetEnvIf User-Agent ".*MSIE.*" \
    nokeepalive ssl-unclean-shutdown \
    downgrade-1.0 force-response-1.0

  CustomLog logs/ssl_request_log \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

  Include /opt/eprints3/cfg/apache_ssl/[repoid].conf

  PerlTransHandler +EPrints::Apache::Rewrite


It is advised that you keep the SSL key, certificate and chain files in the same directory as securevhost.conf, as this will make it easy if you need to migrate you EPrints repository to a new server in the future.

Generate the Apache Configuration File for HTTPS

Run /opt/eprints3/bin/generate_apacheconf --system --replace to generate the secure Apache configuration files. Depending upon the version of EPrints you are using, it may copy the default template /opt/eprints3/archives/[repoid]/cfg/lang/en/templates/default.xml to the template used for HTTPS /opt/eprints3/archives/[repoid]/cfg/lang/en/templates/secure.xml. This will also setup the repository configuration file located in the /opt/eprints3/cfg/apache_ssl/ directory named [repoid].conf. (N.B. EPrints 3.3 and later now uses default.xml template for both HTTP and HTTPS).

Add the Main Apache Config File to SSL Config

Depending upon the version of EPrints you are running there are a couple files that may be involved. It is recommended to run /opt/eprints3/bin/generate_apacheconf --man or view the source of /opt/eprints3/bin/generate_apacheconf file to understand what file(s) need to be setup. In general you will need to place a line like either of the following inside your Apache SSL Virtual Host declaration (most likely found in /etc/httpd/conf.d/mod_ssl.conf or /etc/httpd/conf.d/ssl.conf). Make sure that these lines are placed inside the <VirtualHost> Apache directive.

Include /opt/eprints3/archives/[repoid]/var/auto-secure.conf


Include /opt/eprints3/cfg/apache_ssl.conf

For Red Hat/Fedora/CentOS Linux

Add then add the appropriate Include line above, to the end of /etc/httpd/conf.d/ssl.conf

For Debian/Ubuntu Linux

Make sure the SSL Apache module is enabled, by running the following (as root):

/usr/sbin/a2enmod ssl

Add then add the appropriate Include line above, just before the </IfModule> line in /etc/apache2/mods-enabled/ssl.conf

Restart Apache to pick up the changes to the Apache configuration

Consult your operating system documentation on how to restart service processes but in general you need to run one of the following commands either as root or using sudo:

For Red Hat/Fedora/CentOS Linux

/sbin/service httpd restart

For Debian/Ubuntu Linux

/etc/init.d/apache2 restart


Open your web browser and access your repository via its URL, this should be done over HTTP. When you click to login you should notice that you will be redirected to an HTTPS connection. N.B. Any tasks that require you to be logged in will be redirected to an HTTPS connection otherwise an HTTP request will be used by default.

EPrints default HTTPS configuration is usually sufficient for most institutions needs, as there is no real need to encrypt the requesting and sending of Open Access research. However, if you wish to only ever use HTTPS, then follow the instructions for HTTPS-only and HSTS. HSTS (HTTP Strict Transport Security) ensures that even if the link you click on is for HTTP, your web browser will convert this to HTTPS before making the request. Meaning you will never send any un-encrypted traffic to EPrints. It also helps reduce the load on your repository's server, as it save it having to do the HTTP to HTTPS redirection.

It is generally a good idea to enable HSTS even on repositories with default HTTPS configuration, in case there are any errant bespoke links that could send private information using HTTP. This can be done by adding the following line to /opt/eprints3/archives/[repoid]/ssl/securevhost.conf after the ServerName<//tt> line and then restarting Apache again:

Header set Strict-Transport-Security "max-age=15780000"