Difference between revisions of "Installing EPrints on Debian/Ubuntu"

From EPrints Documentation
Jump to: navigation, search
(Mover useful commands section)
(88 intermediate revisions by 10 users not shown)
Line 1: Line 1:
{{Installation}}
 
 
[[Category:Debian and Ubuntu]]
 
[[Category:Debian and Ubuntu]]
 +
[[Category:Installation]]
  
David Tarrant has built a Debian/Ubuntu package for Eprints.
+
== Requirements ==
 +
* Ubuntu 16.04 LTS, 18.04 LTS or 20.04 LTS (non-LTS versions not recommended) or Debian 9 (Stretch) or 10 (Buster, not thoroughly tested).
  
===Stable Release===
+
== Installing from DEB ==
 +
<ol><li>As the root user create a file at <code>/etc/apt/sources.list.d/eprints.list</code> containing</li>
 +
<!--- http://deb.eprints.org/stable is the location of the 3.3 branch ... -->
 +
deb http://deb.eprints.org/3.4/stable/ ./
 +
<li>Ensure ''gnupg'' package is installed to allow APT keys to added, again as the root user</li>
 +
apt-get install gnupg
 +
<li>To allow the installation of EPrints and all its dependencies execute the following commands, again as the root user</li>
 +
wget -O - http://deb.eprints.org/keyFile | apt-key add -
 +
apt-get update
 +
<li>Select the appropriate current [http://files.eprints.org/view/type/release.html release] depending on output of</li>
 +
apt-cache show eprints
 +
<li>Finally install the selected version, e.g.</li>
 +
apt-get install eprints=3.4.3
 +
</ol>
 +
EPrints ''3.3'' will be installed to <code>/usr/share/eprints3/</code>. EPrints ''3.4'' will be installed to <code>/usr/share/eprints/</code>.
 +
 
 +
However, '''you will not yet have a running archive'''.  Follow the [[Getting Started with EPrints 3]] instructions to set this up.
 +
 
 +
Below are some [[Installing_EPrints_3_via_apt_(Debian/Ubuntu)#Operating_System_Version_Specific_Requirements | caveats for particular versions of Debian and Ubuntu]].
  
Add the following to /etc/apt/sources.list:
+
=== Installing publications flavour ===
 +
EPrints 3.4 DEBs only come with the in-built 'zero' flavour and not the typical publications flavour.  Before trying to set up you archive you will need to (as the eprints user) download the latest publications flavour tarball from https://files.eprints.org/ and unpack it into /usr/share/eprints/:
 +
wget https://files.eprints.org/2551/8/eprints-3.4.3-flavours.tar.gz
 +
tar -xzvf eprints-3.4.3-flavours.tar.gz -C /usr/share/eprints/
 +
mv /usr/share/eprints/eprints-3.4.3/flavours /usr/share/eprints/
 +
rmdir /usr/share/eprints/eprints-3.4.3/
  
deb http://deb.eprints.org/ stable/
+
== Installing EPrints from Source ==
deb-src http://deb.eprints.org/ source/
 
  
===Unstable Release===
+
=== Dependencies and Pre-configuration ===
 +
'''N.B. Installing from a source tarball is generally discouraged particularly for production repositories.  However, if you want to develop the EPrints code or a plugin or Bazaar package it may be useful to install from source, ideally from [https://github.com/eprints/eprints EPrints 3.3] or [https://github.com/eprints/eprints3.4 EPrints 3.4] Core Git repositories.'''
  
To install the latest '''unstable''' release add the following to /etc/apt/sources.list:
+
First, as the root user install all the dependencies for EPrints:
  
  deb http://deb.eprints.org/ unstable/
+
  apt-get install perl libncurses5 libselinux1 libsepol1 apache2 libapache2-mod-perl2 libxml-libxml-perl \
deb-src http://deb.eprints.org/ source/
+
  libunicode-string-perl libterm-readkey-perl libmime-lite-perl libmime-types-perl libdigest-sha-perl \
 +
  libdbd-mysql-perl libxml-parser-perl libxml2-dev libxml-twig-perl libarchive-any-perl libjson-perl \
 +
  liblwp-protocol-https-perl libtext-unidecode-perl lynx wget ghostscript antiword elinks texlive-base \
 +
  texlive-base-bin psutils imagemagick adduser tar gzip mysql-server mysql-client unzip \
 +
  libsearch-xapian-perl libtex-encode-perl libio-string-perl
  
===3.1===
+
Next, create the eprints user
To install the latest 3.1 '''unstable''' release add the following to /etc/apt/sources.list:
 
  
  deb http://deb.eprints.org/3.1/ unstable/
+
  adduser eprints
deb http://deb.eprints.org/3.1/ source/
 
  
Do '''not''' add both the stable and unstable repositories.
+
Now, update Apache configuration to set it up to use the eprints user and group, by ensuring the following lines are set thus in <code>/etc/apache2/envvars</code>:
  
===Installing Eprints via apt-get===
+
export APACHE_RUN_USER=eprints
 +
export APACHE_RUN_GROUP=eprints
  
To install Eprints and all its dependencies execute the following:
+
=== Downloading and Deploying EPrints Source ===
 +
==== EPrints 3.3.x for GitHub ====
  
  apt-get update
+
  apt-get install git
  apt-get install eprints
+
git clone https://github.com/eprints/eprints.git /usr/share/eprints3
 +
cd /usr/share/eprints3
 +
git checkout tags/v3.3.16
 +
chown -R eprints:eprints .
 +
 
 +
==== EPrints 3.4.x for GitHub ====
 +
 
 +
  apt-get install git
 +
git clone https://github.com/eprints/eprints3.4.git /usr/share/eprints
 +
cd /usr/share/eprints
 +
git checkout tags/v3.4.3
 +
chown -R eprints:eprints .
 +
 
 +
==== EPrints 3.4.x from files.eprints.org ====
 +
 
 +
cd /tmp/
 +
wget https://files.eprints.org/2551/7/eprints-3.4.3.tar.gz
 +
tar -xzvf eprints-3.4.3.tar.gz
 +
 
 +
Then put in the source code in place:
 +
 
 +
mv eprints-3.4.3 /usr/share/eprints
 +
chmod 2775 /usr/share/eprints
 +
chown -R eprints:eprints /usr/share/eprints
 +
 
 +
If you want a publications flavoured repository, then also:
 +
 
 +
wget https://files.eprints.org/2551/8/eprints-3.4.3-flavours.tar.gz
 +
tar -xzvf eprints-3.4.3-flavours.tar.gz
 +
mv eprints-3.4.3/flavours/pub_lib /usr/share/eprints/flavours
 +
chmod -R g+w /usr/share/eprints/flavours/pub_lib
 +
chown -R eprints:eprints /usr/share/eprints/flavours/pub_lib
 +
 
 +
=== Configuration ===
 +
Next, as the eprints user copy <code>EPRINTS_PATH/perl_lib/EPrints/SystemSettings.pm.tmpl</code> to <code>EPRINTS_PATH/perl_lib/EPrints/SystemSettings.pm</code>
 +
 
 +
<code>EPRINTS_PATH</code> will be either <code>/usr/share/eprints3/</code> or <code>/usr/share/eprints</code> depending on which instructions you followed above.
 +
 
 +
EPrints is now fully installed at <code>EPRINTS_PATH/</code>. However, you will not yet have a running archive. Follow the [[Getting Started with EPrints 3]] instructions to set this up.
 +
 
 +
=== Post-configuration ===
 +
Next, add the file <code>/etc/apache2/sites-available/eprints.conf</code> with the following line:
 +
 
 +
Include EPRINTS_PATH/cfg/apache.conf
 +
 
 +
To enable this as root run the command:
 +
 
 +
a2ensite eprints
  
===Setting up a Repository===
+
Also it may be necessary to disable the default site otherwise the default Apache page will still be shown:
You should now have a working installation of eprints in /usr/share/eprints3/. Please follow the on-screen instructions to set up an eprints repository. You probably want to start with (as root):
 
  
  su eprints
+
  a2dissite 000-default
cd
 
./bin/epadmin create
 
logout
 
a2ensite eprints3
 
apache2ctl restart
 
  
Known issues with the Debian/Ubuntu package can be found at [[Debian Known Issues]].
+
Finally, restart Apache:
  
===Getting and Compiling from Source===
+
service apache2 restart
  
To install dependencies and retrieve the Eprints source execute the following:
+
You should now be able to access your vanilla repository at the hostname you specified when running '''epadmin create''' from the [[Getting Started with EPrints 3]] instructions.  You should then login as the admin user you created during this process and turn on the indexer.  This can be done by clicking on the '''Admin''' link under the Logged in menu, then clicking on the '''System Tools''' tab and finally the '''Start Indexer''' button.
  
apt-get update
+
=== Useful commands for source development and testing ===
 +
The following commands may be useful for those developing or testing EPrints by are not necessary for installing EPrints.
 +
==== Install EPrints build dependencies ====
 
  apt-get build-dep eprints
 
  apt-get build-dep eprints
 +
==== Get EPrints source ====
 
  apt-get source eprints
 
  apt-get source eprints
 +
==== Rebuilding ====
 +
To change the way the eprints builds you can edit the debian/rules file (the only line you will want is the configure one). Once done you can then type <code>dpkg-buildpackage -rfakeroot</code> from the root dir of the extracted tarball.
 +
 +
This will build you a .deb in the directory above your current location, which can then be installed usinging dpkg:
 +
dpkg -i ../eprints-X.X.X_all.deb
 +
 +
Alternatively you can configure and install it yourself (a non debian specific version) by configuring manually and then running install.pl:
 +
$ ./configure --with-smtp-server=smtp.yourdomain
 +
$ sudo ./install.pl
 +
 +
== Operating System Version Specific Requirements ==
 +
 +
=== Ubuntu 18.04 LTS ===
 +
{{:Issues with Installing EPrints on Ubuntu 18.04}}
 +
 +
=== Ubuntu 20.04 LTS ===
 +
{{:Issues with Installing EPrints on Ubuntu 20.04}}
  
The source will be saved to a tarball in the current directory.
+
=== Debian Known Issues ===
 +
See [[Debian Known Issues]]

Revision as of 08:29, 30 April 2021


Requirements

  • Ubuntu 16.04 LTS, 18.04 LTS or 20.04 LTS (non-LTS versions not recommended) or Debian 9 (Stretch) or 10 (Buster, not thoroughly tested).

Installing from DEB

  1. As the root user create a file at /etc/apt/sources.list.d/eprints.list containing
  2. deb http://deb.eprints.org/3.4/stable/ ./
    
  3. Ensure gnupg package is installed to allow APT keys to added, again as the root user
  4. apt-get install gnupg
    
  5. To allow the installation of EPrints and all its dependencies execute the following commands, again as the root user
  6. wget -O - http://deb.eprints.org/keyFile | apt-key add -
    apt-get update
    
  7. Select the appropriate current release depending on output of
  8. apt-cache show eprints
    
  9. Finally install the selected version, e.g.
  10. apt-get install eprints=3.4.3
    

EPrints 3.3 will be installed to /usr/share/eprints3/. EPrints 3.4 will be installed to /usr/share/eprints/.

However, you will not yet have a running archive. Follow the Getting Started with EPrints 3 instructions to set this up.

Below are some caveats for particular versions of Debian and Ubuntu.

Installing publications flavour

EPrints 3.4 DEBs only come with the in-built 'zero' flavour and not the typical publications flavour. Before trying to set up you archive you will need to (as the eprints user) download the latest publications flavour tarball from https://files.eprints.org/ and unpack it into /usr/share/eprints/:

wget https://files.eprints.org/2551/8/eprints-3.4.3-flavours.tar.gz
tar -xzvf eprints-3.4.3-flavours.tar.gz -C /usr/share/eprints/
mv /usr/share/eprints/eprints-3.4.3/flavours /usr/share/eprints/
rmdir /usr/share/eprints/eprints-3.4.3/

Installing EPrints from Source

Dependencies and Pre-configuration

N.B. Installing from a source tarball is generally discouraged particularly for production repositories. However, if you want to develop the EPrints code or a plugin or Bazaar package it may be useful to install from source, ideally from EPrints 3.3 or EPrints 3.4 Core Git repositories.

First, as the root user install all the dependencies for EPrints:

apt-get install perl libncurses5 libselinux1 libsepol1 apache2 libapache2-mod-perl2 libxml-libxml-perl \
  libunicode-string-perl libterm-readkey-perl libmime-lite-perl libmime-types-perl libdigest-sha-perl \ 
  libdbd-mysql-perl libxml-parser-perl libxml2-dev libxml-twig-perl libarchive-any-perl libjson-perl \
  liblwp-protocol-https-perl libtext-unidecode-perl lynx wget ghostscript antiword elinks texlive-base \
  texlive-base-bin psutils imagemagick adduser tar gzip mysql-server mysql-client unzip \
  libsearch-xapian-perl libtex-encode-perl libio-string-perl

Next, create the eprints user

adduser eprints

Now, update Apache configuration to set it up to use the eprints user and group, by ensuring the following lines are set thus in /etc/apache2/envvars:

export APACHE_RUN_USER=eprints
export APACHE_RUN_GROUP=eprints

Downloading and Deploying EPrints Source

EPrints 3.3.x for GitHub

apt-get install git
git clone https://github.com/eprints/eprints.git /usr/share/eprints3
cd /usr/share/eprints3
git checkout tags/v3.3.16
chown -R eprints:eprints .

EPrints 3.4.x for GitHub

apt-get install git
git clone https://github.com/eprints/eprints3.4.git /usr/share/eprints
cd /usr/share/eprints
git checkout tags/v3.4.3
chown -R eprints:eprints .

EPrints 3.4.x from files.eprints.org

cd /tmp/
wget https://files.eprints.org/2551/7/eprints-3.4.3.tar.gz
tar -xzvf eprints-3.4.3.tar.gz

Then put in the source code in place:

mv eprints-3.4.3 /usr/share/eprints
chmod 2775 /usr/share/eprints
chown -R eprints:eprints /usr/share/eprints

If you want a publications flavoured repository, then also:

wget https://files.eprints.org/2551/8/eprints-3.4.3-flavours.tar.gz
tar -xzvf eprints-3.4.3-flavours.tar.gz
mv eprints-3.4.3/flavours/pub_lib /usr/share/eprints/flavours
chmod -R g+w /usr/share/eprints/flavours/pub_lib
chown -R eprints:eprints /usr/share/eprints/flavours/pub_lib

Configuration

Next, as the eprints user copy EPRINTS_PATH/perl_lib/EPrints/SystemSettings.pm.tmpl to EPRINTS_PATH/perl_lib/EPrints/SystemSettings.pm

EPRINTS_PATH will be either /usr/share/eprints3/ or /usr/share/eprints depending on which instructions you followed above.

EPrints is now fully installed at EPRINTS_PATH/. However, you will not yet have a running archive. Follow the Getting Started with EPrints 3 instructions to set this up.

Post-configuration

Next, add the file /etc/apache2/sites-available/eprints.conf with the following line:

Include EPRINTS_PATH/cfg/apache.conf

To enable this as root run the command:

a2ensite eprints

Also it may be necessary to disable the default site otherwise the default Apache page will still be shown:

a2dissite 000-default

Finally, restart Apache:

service apache2 restart

You should now be able to access your vanilla repository at the hostname you specified when running epadmin create from the Getting Started with EPrints 3 instructions. You should then login as the admin user you created during this process and turn on the indexer. This can be done by clicking on the Admin link under the Logged in menu, then clicking on the System Tools tab and finally the Start Indexer button.

Useful commands for source development and testing

The following commands may be useful for those developing or testing EPrints by are not necessary for installing EPrints.

Install EPrints build dependencies

apt-get build-dep eprints

Get EPrints source

apt-get source eprints

Rebuilding

To change the way the eprints builds you can edit the debian/rules file (the only line you will want is the configure one). Once done you can then type dpkg-buildpackage -rfakeroot from the root dir of the extracted tarball.

This will build you a .deb in the directory above your current location, which can then be installed usinging dpkg:

dpkg -i ../eprints-X.X.X_all.deb

Alternatively you can configure and install it yourself (a non debian specific version) by configuring manually and then running install.pl:

$ ./configure --with-smtp-server=smtp.yourdomain
$ sudo ./install.pl

Operating System Version Specific Requirements

Ubuntu 18.04 LTS

N.B. It is assumed that you are installing the latest version of 3.4. Earlier versions may have issues not listed here.

MySQL root user cannot be used

On Ubuntu 18.04 LTS rather than prompting you to set a password for MySQL server when installing this as a dependency, it just installs it without. However, this means on the root user can login to MySQL to add a database. As "epadmin create" runs at the eprints user, this will not be able to create a database for EPrints. To get round this as the root user connect to MySQL (just type "mysql" at the command line) and type the following two commands. You will want to set your own password (i.e. not 'changeme'), you may also want to restrict which databases the eprints user has control over. If you know the "Archive ID" you are going to use.

CREATE USER 'eprints'@'localhost' IDENTIFIED by 'changeme';
GRANT ALL PRIVILEGES ON *.* TO 'eprints'@'localhost' WITH GRANT OPTION;

Ubuntu 20.04 LTS

N.B. It is assumed that you are installing the latest version of 3.4. Earlier versions may have issues not listed here.

MySQL root user cannot be used

On Ubuntu 20.04 LTS rather than prompting you to set a password for MySQL server when installing this as a dependency, it just installs it without. However, this means on the root user can login to MySQL to add a database. As "epadmin create" runs at the eprints user, this will not be able to create a database for EPrints. The get round this as the root user connect to MySQL (just type "mysql" at the command line) and type the following two commands. You will want to set your own password (i.e. not 'changeme') , you may also want to restrict which databases the eprints user has control over. If you know the "Archive ID" you are going to use.

CREATE USER 'eprints'@'localhost' IDENTIFIED by 'changeme';
GRANT ALL PRIVILEGES ON *.* TO 'eprints'@'localhost' WITH GRANT OPTION;

Previous issues

xpdf Deb package no longer exists 
This has been removed as a dependency since EPrints 3.4.3, as it is no longer specifically required by EPrints.
MySQL deprecated syntax 
GRANT PRIVILEGES command used by epadmin has been modified to avoid using deprecated syntax since EPrints 3.4.3.

Debian Known Issues

See Debian Known Issues