Difference between revisions of "Installing EPrints on Debian/Ubuntu"

From EPrints Documentation
Jump to: navigation, search
(Added instructions for 18.04 and overall simplified now we have a Deb packages that negates some of the older issues.)
(Added 20.04 issues)
(33 intermediate revisions by 2 users not shown)
Line 3: Line 3:
  
 
== Requirements ==
 
== Requirements ==
* Ubuntu 14.04 LTS, 16.04 LTS or 18.04 LTS (non-LTS versions not recommended) or Debian 7 (Wheezy) or 8 (Jessie).
+
* Ubuntu 16.04 LTS or 18.04 LTS (non-LTS versions not recommended) or Debian 8 (Jessie), 9 (Stretch) or 10 (Buster, not thoroughly tested).
  
== Installing from EPrints 3.3.x DEB ==
+
== Installing from DEB ==
The latest version of EPrints 3.3 is 3.3.16This version can be installed as follows
+
<ol><li>As the root user create a file at <code>/etc/apt/sources.list.d/eprints.list</code> containing</li>
 +
<!--- http://deb.eprints.org/stable is the location of the 3.3 branch ... -->
 +
deb http://deb.eprints-hosting.org/3.4/stable/ ./
 +
<li>To allow the installation of EPrints and all its dependencies execute the following commands, again as the root user</li>
 +
wget -O - http://deb.eprints-hosting.org/keyFile | apt-key add -
 +
apt-get update
 +
<li>Select the appropriate current [http://files.eprints.org/view/type/release.html release] depending on output of</li>
 +
apt-cache show eprints
 +
<li>Finally install the selected version, e.g.</li>
 +
apt-get install eprints=3.4.1
 +
</ol>
 +
EPrints ''3.3'' will be installed to <code>/usr/share/eprints3/</code>. EPrints ''3.4'' will be installed to <code>/usr/share/eprints/</code>.
 +
 
 +
However, '''you will not yet have a running archive'''Follow the [[Getting Started with EPrints 3]] instructions to set this up.
  
1. As the root user create a file at /etc/apt/sources.list.d/eprints.list and add the following line:
+
Below are some [[Installing_EPrints_3_via_apt_(Debian/Ubuntu)#Operating_System_Version_Specific_Requirements | caveats for particular versions of Debian and Ubuntu]].
deb http://deb.eprints.org/stable ./
 
2. Now to install EPrints and all its dependencies execute the following command, again as the root user:
 
wget -O - http://deb.eprints.org/keyFile | apt-key add -
 
apt-get update
 
apt-get install eprints
 
  
EPrints will now be installed at /usr/share/eprints3/. However, you will not yet have a running archive. Follow the [[Getting Started with EPrints 3]] instructions to set this upBelow are some caveats for particular version of Debian and Ubuntui
+
'''N.B. If you are installing EPrints ''3.4'' from the DEB package then you will ''only'' get the ''zero flavour''. If you want the publications flavour you will need to download the [https://files.eprints.org/2401/8/eprints-3.4.1-flavours.tar.gz flavours tarball] (see [[Installing_EPrints_3_via_apt_(Debian/Ubuntu)#Downloading_and_Deploying_EPrints_Source | Downloading and Deploying EPrints Source]] below) and copy the <code>./pub_lib</code> subdirectory into <code>/usr/share/eprints/flavours/</code>It is planned that future versions of EPrints 3.4 will have their own publication flavours DEB package.'''
  
=== Ubuntu 18.04 LTS ===
+
== Installing EPrints from Source ==
On Ubuntu 18.04 LTS rather than prompting you to set a password for MySQL server when installing this as a dependency, it just installs it without.  However, this means on the root user can login to MySQL to add a database.  As "epadmin create" runs at the eprints user, this will not be able to create a database for EPrints.  The get round this as the root user connect to MySQL (just type "mysql" at the command line) and type the following two commands.  You will want to set your own password (i.e. not 'changeme') , you may also want to restrict which databases the eprints user has control over.  If you know the "Archive ID" you are going to use.
 
CREATE USER 'eprints'@'localhost' IDENTIFIED by 'changeme';
 
GRANT ALL PRIVILEGES ON *.* TO 'eprints'@'localhost' WITH GRANT OPTION;
 
  
 +
=== Dependencies and Pre-configuration ===
  
== Installing EPrints 3.3.x from Source ==
+
'''N.B. Installing from a source tarball is generally discouraged particularly for production repositories.  However, if want to develop the EPrints code or a plugin or Bazaar package it may be useful to install from source, ideally from [https://github.com/eprints/eprints EPrints 3.3] or [https://github.com/eprints/eprints3.4 EPrints 3.4] Core Git repositories.'''
'''N.B. Installing from source is generally discouraged particularly for production repositories.  However, if want to develop the EPrints code or a plugin or Bazaar package it may be useful to install from source, ideally from [https://github.com/eprints/eprints EPrints Core Git repository].'''
 
  
 
First, as the root user install all the dependencies for EPrints:
 
First, as the root user install all the dependencies for EPrints:
  
  apt-get install perl libncurses5 libselinux1 libsepol1 apache2 libapache2-mod-perl2 libxml-libxml-perl libunicode-string-perl \
+
  apt-get install perl libncurses5 libselinux1 libsepol1 apache2 libapache2-mod-perl2 libxml-libxml-perl \
  libterm-readkey-perl libmime-lite-perl libmime-types-perl libdigest-sha-perl libdbd-mysql-perl libxml-parser-perl libxml2-dev \
+
  libunicode-string-perl libterm-readkey-perl libmime-lite-perl libmime-types-perl libdigest-sha-perl \
  libxml-twig-perl libarchive-any-perl libjson-perl lynx wget ghostscript xpdf antiword elinks texlive-base texlive-base-bin \
+
  libdbd-mysql-perl libxml-parser-perl libxml2-dev libxml-twig-perl libarchive-any-perl libjson-perl \
  psutils imagemagick adduser tar gzip mysql-server mysql-client unzip libsearch-xapian-perl
+
  liblwp-protocol-https-perl libtext-unidecode-perl lynx wget ghostscript xpdf antiword elinks \
 +
  texlive-base texlive-base-bin psutils imagemagick adduser tar gzip mysql-server mysql-client unzip \
 +
  libsearch-xapian-perl libtex-encode-perl
  
 
Next, create the eprints user
 
Next, create the eprints user
  
  useradd eprints
+
  adduser eprints
 
 
Next, clone the Git repository from GitHub to /opt/ and set the eprints user as the owner.  It is probably best to checkout the latest release rather than using HEAD, which may have known issues:
 
  
apt-get install git
 
git clone https://github.com/eprints/eprints.git /opt/eprints3
 
cd /opt/eprints3/
 
git checkout tags/v3.3.15
 
chown -R eprints:eprints .
 
  
 
Next, as the eprints user copy /opt/eprints3/perl_lib/EPrints/SystemSettings.pm.tmpl to /opt/eprints3/perl_lib/EPrints/SystemSettings.pm
 
Next, as the eprints user copy /opt/eprints3/perl_lib/EPrints/SystemSettings.pm.tmpl to /opt/eprints3/perl_lib/EPrints/SystemSettings.pm
Line 54: Line 54:
 
  export APACHE_RUN_GROUP=eprints
 
  export APACHE_RUN_GROUP=eprints
  
Next, add the file /etc/apache2/sites-available/eprints.conf with the following line:
+
=== Downloading and Deploying EPrints Source ===
 +
==== EPrints 3.3.x for GitHub ====
 +
 
 +
apt-get install git
 +
git clone https://github.com/eprints/eprints.git /opt/eprints3
 +
cd /opt/eprints3/
 +
git checkout tags/v3.3.16
 +
chown -R eprints:eprints .
 +
 
 +
==== EPrints 3.4.x for GitHub ====
 +
 
 +
apt-get install git
 +
git clone https://github.com/eprints/eprints3.4.git /opt/eprints3
 +
cd /opt/eprints3/
 +
git checkout tags/v3.4.1
 +
chown -R eprints:eprints .
 +
 
 +
==== EPrints 3.4.x from files.eprints.org ====
 +
 
 +
cd /tmp/
 +
wget https://files.eprints.org/2401/7/eprints-3.4.1.tar.gz
 +
tar -xzvf eprints-3.4.1.tar.gz
 +
 +
Then put in the source code in place:
 +
 
 +
mv eprints-3.4.1 /opt/eprints3
 +
chmod 2775 /opt/eprints3
 +
chown -R eprints:eprints /opt/eprints3
  
Include /opt/eprints3/cfg/apache.conf
+
If you want a publications flavoured repository, then also:
  
To enable this as root run the command:
+
wget https://files.eprints.org/2401/8/eprints-3.4.1-flavours.tar.gz
 +
tar -xzvf eprints-3.4.1-flavours.tar.gz
 +
mv eprints-3.4.1/flavours/pub_lib/ /opt/eprints3/flavours/
 +
chmod -R g+w /opt/eprints3/flavours/pub_lib
 +
chown -R eprints:eprints /opt/eprints3/flavours/pub_lib/
  
a2ensite eprints
+
=== Configuration ===
 +
Next, as the eprints user copy /opt/eprints3/perl_lib/EPrints/SystemSettings.pm.tmpl to /opt/eprints3/perl_lib/Eprints/SystemSettings.pm
  
Finally, restart Apache:
+
EPrints is now fully installed at /opt/eprints3. However, you will not yet have a running archive. Follow the [[Getting Started with EPrints 3]] instructions to set this up.
  
apachectl restart
+
=== Post-configuration ===
 +
Next, add the file /etc/apache2/sites-available/eprints.conf with the following line:
  
You should now be able to access your vanilla repository at the hostname you specified when running '''epadmin create''' from the [[Getting Started with EPrints 3]] instructions.
+
Include EPRINTS_PATH/cfg/apache.conf
  
 +
EPRINTS_PATH will be either /opt/eprints3/ or /usr/share/eprints depending on which instructions you followed above.
  
== Troubleshooting ==
+
To enable this as root run the command:
  
===Issues with Ubuntu 14.04 (Apache 2.3/2.4)===
+
a2ensite eprints
  
Apache 2.3+ and PERL v5.16+ introduce a few changes which break EPrints.
+
Also it may be necessary to disable the default site otherwise the default Apache page will still be shown:
  
A complete HOW-TO guide to install EPrints3 on Ubuntu 14.04 is available [http://wiki.unimas.my/unimaswiki//bin/view/HOW-TO,+Tutorial+&+User+Manual/HOW-TO+:+Install+Eprints+v3.3.12++on+Ubuntu+14.04+With+LDAP+Authentication here]
+
a2dissite 000-default
  
Current patches on github are:
+
Finally, restart Apache:
  
* See last comment on https://github.com/eprints/eprints/issues/214 [ use of remote_ip ]
+
  service apache2 restart
* https://github.com/eprints/eprints/issues/237 [ NameVirtualHost deprecated ]
 
* https://github.com/eprints/eprints/issues/236 [ Order allow,deny deprecated ]
 
* https://github.com/eprints/eprints/commit/157db0d27d423d38f9c0fc31ce47e519cd861d45 [ utf8::decode and URI parameters ]
 
  
 +
You should now be able to access your vanilla repository at the hostname you specified when running '''epadmin create''' from the [[Getting Started with EPrints 3]] instructions.  You should then login as the admin user you created during this process and turn on the indexer.  This can be done by clicking on the '''Admin''' link under the Logged in menu, then clicking on the '''System Tools''' tab and finally the '''Start Indexer''' button.
  
Ensure that mpm_prefork module is enabled in /etc/apache2/mods-enabled (among others).
+
== Operating System Version Specific Requirements ==
  
Complete list of modules for a working repository include the following (although some may be surplus to requirements e.g. php5 is not strictly necessary)
+
=== Ubuntu 18.04 LTS ===
 +
{{:Issues with Installing EPrints on Ubuntu 18.04}}
  
*access_compat.load                   
+
=== Ubuntu 20.04 LTS ===
*alias.conf                                   
+
{{:Issues with Installing EPrints on Ubuntu 20.04}}
*alias.load                             
 
*auth_basic.load                           
 
*authn_core.load
 
*authn_file.load
 
*authz_core.load
 
*authz_host.load
 
*authz_user.load
 
*autoindex.conf
 
*autoindex.load
 
*deflate.conf
 
*deflate.load
 
*dir.conf
 
*dir.load
 
*env.load
 
*filter.load
 
*mime.conf
 
*mime.load
 
*mpm_prefork.conf
 
*mpm_prefork.load
 
*negotiation.conf
 
*negotiation.load
 
*perl.load
 
*php5.conf
 
*php5.load
 
*setenvif.conf
 
*setenvif.load
 
*status.conf
 
*status.load
 

Revision as of 12:27, 19 May 2020


Requirements

  • Ubuntu 16.04 LTS or 18.04 LTS (non-LTS versions not recommended) or Debian 8 (Jessie), 9 (Stretch) or 10 (Buster, not thoroughly tested).

Installing from DEB

  1. As the root user create a file at /etc/apt/sources.list.d/eprints.list containing
  2. deb http://deb.eprints-hosting.org/3.4/stable/ ./
    
  3. To allow the installation of EPrints and all its dependencies execute the following commands, again as the root user
  4. wget -O - http://deb.eprints-hosting.org/keyFile | apt-key add -
    apt-get update
    
  5. Select the appropriate current release depending on output of
  6. apt-cache show eprints
    
  7. Finally install the selected version, e.g.
  8. apt-get install eprints=3.4.1
    

EPrints 3.3 will be installed to /usr/share/eprints3/. EPrints 3.4 will be installed to /usr/share/eprints/.

However, you will not yet have a running archive. Follow the Getting Started with EPrints 3 instructions to set this up.

Below are some caveats for particular versions of Debian and Ubuntu.

N.B. If you are installing EPrints 3.4 from the DEB package then you will only get the zero flavour. If you want the publications flavour you will need to download the flavours tarball (see Downloading and Deploying EPrints Source below) and copy the ./pub_lib subdirectory into /usr/share/eprints/flavours/. It is planned that future versions of EPrints 3.4 will have their own publication flavours DEB package.

Installing EPrints from Source

Dependencies and Pre-configuration

N.B. Installing from a source tarball is generally discouraged particularly for production repositories. However, if want to develop the EPrints code or a plugin or Bazaar package it may be useful to install from source, ideally from EPrints 3.3 or EPrints 3.4 Core Git repositories.

First, as the root user install all the dependencies for EPrints:

apt-get install perl libncurses5 libselinux1 libsepol1 apache2 libapache2-mod-perl2 libxml-libxml-perl \
  libunicode-string-perl libterm-readkey-perl libmime-lite-perl libmime-types-perl libdigest-sha-perl \ 
  libdbd-mysql-perl libxml-parser-perl libxml2-dev libxml-twig-perl libarchive-any-perl libjson-perl \
  liblwp-protocol-https-perl libtext-unidecode-perl lynx wget ghostscript xpdf antiword elinks \ 
  texlive-base texlive-base-bin psutils imagemagick adduser tar gzip mysql-server mysql-client unzip \
  libsearch-xapian-perl libtex-encode-perl

Next, create the eprints user

adduser eprints


Next, as the eprints user copy /opt/eprints3/perl_lib/EPrints/SystemSettings.pm.tmpl to /opt/eprints3/perl_lib/EPrints/SystemSettings.pm

EPrints is now fully installed at /opt/eprints3. However, you will not yet have a running archive. Follow the Getting Started with EPrints 3 instructions to set this up.

Now, update Apache configuration to set it up to use the eprints user and group, by ensuring the following lines are set thus in /etc/apache2/envvars:

export APACHE_RUN_USER=eprints
export APACHE_RUN_GROUP=eprints

Downloading and Deploying EPrints Source

EPrints 3.3.x for GitHub

apt-get install git
git clone https://github.com/eprints/eprints.git /opt/eprints3
cd /opt/eprints3/
git checkout tags/v3.3.16
chown -R eprints:eprints .

EPrints 3.4.x for GitHub

apt-get install git
git clone https://github.com/eprints/eprints3.4.git /opt/eprints3
cd /opt/eprints3/
git checkout tags/v3.4.1
chown -R eprints:eprints .

EPrints 3.4.x from files.eprints.org

cd /tmp/
wget https://files.eprints.org/2401/7/eprints-3.4.1.tar.gz
tar -xzvf eprints-3.4.1.tar.gz

Then put in the source code in place:

mv eprints-3.4.1 /opt/eprints3
chmod 2775 /opt/eprints3
chown -R eprints:eprints /opt/eprints3

If you want a publications flavoured repository, then also:

wget https://files.eprints.org/2401/8/eprints-3.4.1-flavours.tar.gz
tar -xzvf eprints-3.4.1-flavours.tar.gz
mv eprints-3.4.1/flavours/pub_lib/ /opt/eprints3/flavours/
chmod -R g+w /opt/eprints3/flavours/pub_lib
chown -R eprints:eprints /opt/eprints3/flavours/pub_lib/

Configuration

Next, as the eprints user copy /opt/eprints3/perl_lib/EPrints/SystemSettings.pm.tmpl to /opt/eprints3/perl_lib/Eprints/SystemSettings.pm

EPrints is now fully installed at /opt/eprints3. However, you will not yet have a running archive. Follow the Getting Started with EPrints 3 instructions to set this up.

Post-configuration

Next, add the file /etc/apache2/sites-available/eprints.conf with the following line:

Include EPRINTS_PATH/cfg/apache.conf

EPRINTS_PATH will be either /opt/eprints3/ or /usr/share/eprints depending on which instructions you followed above.

To enable this as root run the command:

a2ensite eprints

Also it may be necessary to disable the default site otherwise the default Apache page will still be shown:

a2dissite 000-default

Finally, restart Apache:

service apache2 restart

You should now be able to access your vanilla repository at the hostname you specified when running epadmin create from the Getting Started with EPrints 3 instructions. You should then login as the admin user you created during this process and turn on the indexer. This can be done by clicking on the Admin link under the Logged in menu, then clicking on the System Tools tab and finally the Start Indexer button.

Operating System Version Specific Requirements

Ubuntu 18.04 LTS

N.B. It is assumed that you are installing the latest version of 3.4. Earlier versions may have issues not listed here.

MySQL root user cannot be used

On Ubuntu 18.04 LTS rather than prompting you to set a password for MySQL server when installing this as a dependency, it just installs it without. However, this means on the root user can login to MySQL to add a database. As "epadmin create" runs at the eprints user, this will not be able to create a database for EPrints. To get round this as the root user connect to MySQL (just type "mysql" at the command line) and type the following two commands. You will want to set your own password (i.e. not 'changeme'), you may also want to restrict which databases the eprints user has control over. If you know the "Archive ID" you are going to use.

CREATE USER 'eprints'@'localhost' IDENTIFIED by 'changeme';
GRANT ALL PRIVILEGES ON *.* TO 'eprints'@'localhost' WITH GRANT OPTION;

Ubuntu 20.04 LTS

N.B. It is assumed that you are installing the latest version of 3.4. Earlier versions may have issues not listed here.

MySQL root user cannot be used

On Ubuntu 20.04 LTS rather than prompting you to set a password for MySQL server when installing this as a dependency, it just installs it without. However, this means on the root user can login to MySQL to add a database. As "epadmin create" runs at the eprints user, this will not be able to create a database for EPrints. The get round this as the root user connect to MySQL (just type "mysql" at the command line) and type the following two commands. You will want to set your own password (i.e. not 'changeme') , you may also want to restrict which databases the eprints user has control over. If you know the "Archive ID" you are going to use.

CREATE USER 'eprints'@'localhost' IDENTIFIED by 'changeme';
GRANT ALL PRIVILEGES ON *.* TO 'eprints'@'localhost' WITH GRANT OPTION;

Previous issues

xpdf Deb package no longer exists 
This has been removed as a dependency since EPrints 3.4.3, as it is no longer specifically required by EPrints.
MySQL deprecated syntax 
GRANT PRIVILEGES command used by epadmin has been modified to avoid using deprecated syntax since EPrints 3.4.3.